Installation Instructions

Step 1: Install the bricks or pavers Step 1:
Install the pavers as per the recommendations of the manufacturer

 

 

 

Step 2: Slide the bottom section of Diamond-Lok under the sidewall with a mallet until the edging sidewall is flush with the bricks or pavers Step 2:
Slide the bottom section of Diamond-Lok up to the sidewall until the edging sidewall is flush with the pavers

 

 

Step 3: Install the stakes at each end and approximately every 2 feet by pounding them through the holes provided on an angle facing the pavers


Step 3:
Install the stakes at each end and approximately every 2 feet by pounding them through the holes provided on an angle facing the pavers

NOTE: Anchor stakes need to be hammered in at the angle shown in the picture with the head of the anchor stake pointing up.

Step 4: Backfill with soil and sod flush against edging sidewallStep 4:
Backfill with soil and sod flush against edging sidewall

Print Friendly