Stakes

Poly Stakes Poly Stakes are made of the same material as the Poly Board. They come in 12” lengths for the 1” x 4” and 18” lengths for the 1” x 6” boards. They may be utilized in the middle or the board run to hold the board down. The recommended frequency of stakes is 1 every 3 Füße. They should be fastened to the Poly Board by 1 wallboard screw. This allows the stake to swivel on the board during the expansion & contraction. (Two screws would bind the board and stake.) These are alternatives to the metal stake in the middle or the board run section of the board installation.

Poly Board 1" x 4" Poly StakesPoly Board 1″ x 4″ Poly Stakes

Farbe: Brown
50-12″ Stakes per Case
Produkt-Code: PBAS4-BB

 


Poly Board 1" x 4" Poly Stakes - Light BrownPoly Board 1″ x 4″ Poly Stakes

Farbe: Light Brown
50-12″ Stakes per Case
Produkt-Code: PBAS4-BLB

 

Poly Board 1" x 4" Poly Stakes - BrownPoly Board 1″ x 6 ” Poly Stakes

Farbe: Brown
50-18″ Stakes per Case
Produkt-Code: PBAS6-BB

 


Poly Board 1" x 4" Poly Stakes - Light BrownPoly Board 1″ x 6 ” Poly Stakes

Farbe: Light Brown
50-18″ Stakes per Case
Produkt-Code: PBAS6-BLB

 

Metal Saddle Stakes

Diese Einsätze kommen in 13 "Längen für die 1" x 4 "für den Einsatz an den Gelenken von Poly Vorstand. These stakes allow the Poly Board to expand and contract with the seasonal weather patterns without the bucking effect at the joints. These stakes can also be utilized in the middle or the board run to hold the board down. 1 stake every 3 feet is the recommended distance between stakes.

Poly Board 1" x 4" Metal Stakes - BrownPoly Board 1″ x 4″ Metal Stakes

Farbe: Brown
50-13″ Stakes per Case
Produkt-Code: SKPB4-50B

Print Friendly